Please answer the question. "How do you change an oxygen sensor in a 2002 Pontiac Bonneville
where is a knock sensor located on a 96 Pontiac Bonneville
where is a map sensor loction for 1994 ponatic bonneville?
Cam Sensor Circuit
Where is the crank shaft located on a 1999 Pontiac Bonneville? I have bought the part. Just can't find where it goes.
The cam sensor on a 1987 Bonneville is just below the water pump, it has a gray electrical connector.
sensor de map
It is on the intake manifold near the thermostat housing.
Did John Brennen convert to Islam
code 32 -1987-Pontiac bonevillecode 32 on 1987 Pontiac Bonneville -means-Baro sensor or circuit(carbureted models)or if(fuel injected model)means-EGR circuit
on a 93 Pontiac Bonneville you would remove the passenger side front tire. there may be a plastic cover that just pulls off. look to your left,back and up a little bit you should see the wires that connect to your cam sensor. theres your cam sensor. 91 Bonneville is probably the same.
next to the left muffler throwout bearing tdc sensor
one location of map sensor on some pontisome Pontiac Bonneville,s map sensors are located in the vicinity of the pcv--valve, over top of it , depends on year.
I have a 92 Bonneville thet needs a crank sensor how do you change it Crank sensor is on the pulley and the teeth on the pulley sits inside of it for a megnetic response for computer. It is held on by two small bolts. I changed my own on my 3.8L and my car doesnt want to shift correctly. You are able to adjust and its very picky where the correct position is.
Small black box mounted onto the throttle body.
it should be on the right side right neer the belt
The Camshaft Sensor is located right behind the crank shaft fly wheel and can be very hard to change out without consulting a mechanic first.
Typically the O2 sensor is located at the back of the engine, follow the exhaust manifold and it should be attached somewhere near it
my son just replaced one on my car i also have a 1992 Bonneville it is located on the passenger side frount behind the tire you will need to remove your tire
evidentually it is a big secret. They will only tell you where to go to buy one.
You got to have a star bit with a hole in the middle the mad is on top of the air duct
The cam shaft sensor is located behind the water pump pulley. One bolt that holds it in place.
Try looking at the back of the engine on the maifold just before it connects to the exhaust pipe.
I have a 92 Buick Riviera 3800. The temp sensor on my car is just underneath the throttle body... driver's side of the engine