How do you change the air filter in a 2006 kawasaki ninja 250?

Answer 1

Remove the seat. Remove the strap that is across the airbox and battery by reaching down behind the battery and sliding the strap clip to the left side of the bike while relieving the tension on the strap. Pull the airbox lid off. Remove the white plastic filter holder then remove the foam filter. Clean the filter in detergent and water, let dry. Saturate the filter with motor oil, squeezing out as much excess as you can. Put the filter back in, squeezing it as far forward in the box as you can. Install the white plastic filter holder as far forward as you can, it should snap into place. Reinstall the airbox top, be sure to note the airflow direction (there should be an arrow on the airbox top) Stretch the rubber strap over the airbox lid and battery and slide the clip behind the battery with your hand, to the left side of the bike. When you can feel the clip is past the notch for it, slide it to the right of the bike and it should hold.