first you must loosen a 12mm bolt behind the pulley of the ac compressor, its a little tough to get to, but you can get it with an extended wrench, then loosen up the ac compressor bolt, pry it forward if it doesnt do it automatically, take your timing belt off, then go to your alternator bolt unerneath the alternator, loosen it rock it forward and pull off your belt, obviously reverse everything you just did to put it back together P.S. you can pretty much rebuild the geo storm engine with a 12mm wrench, lol
Loosen the tensioner bolt on your 1990 Buick LeSabre alternator. Slide the alternator to the left and remove the alternator belt. Remove the wiring harness from the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
the alternator and belt are located at the bottom of the engine on the passenger side looking at the timing belt side
how do you change 2004 kia sorento alternator belt
Loosen the alternator tensioner bolt. The alternator belt will become loose. Remove the alternator belt. Put the new alternator belt on and reverse the process.
the belt only goes around the crank pulley and alternator pulley
Disconnect the 1990 Regal battery. Remove the alternator belt. Unhook the wiring from the alternator then unbolt it. Remove and replace the alternator then reconnect the wiring, belt, and reconnect the battery to finish the installation.
The alternator is driven by a belt. Follow the belts and you will find the alternator.
You have to remove the power steering belt and the AC belt to remove the alternator belt.
Begin by removing the alternator tensioner bolt. Slide the alternator to the left. Remove the alternator belt. Reverse the process to install the new alternator belt.
can you change the alternator belt in a 1998 Chevy metro from under the car.
Remove the wiring harness from your 1990 Subaru alternator. Remove the alternator belt. Remove the alternator retaining bolts. Reverse the process to install your new alternator.
To change the alternator belt an a 1985 Chevy Celebrity: 1. Loosen the adjuster bolt and the mounting bolt. 2. Move the alternator to release the belt tension and remove the belt. Reverse to reinstall a new belt.
It has a serptine belt that goes around the alternator and water pump etc. And in fromt of the radiator you will see a pully with a bolt on it that is the belt tentioner its spring loaded take a box wrench and pull up on it to take off the belt and take the bots off the alternator and replace and repeat the steps in reverse order to put the belt back on.
Remove the belt from your 1990 Acura Legend alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
To change the alternator drive belt on a Bobcat 853 you start by lifting the cab. With the cab up, you can see the back of the engine and alternator. Locate the belts spring tensioner and release the belt.
You can change the alternator belt, on your 1994 General Motors vehicle, by loosening the tensioner pulley. The loosened the tensioner pulley will create slack in the belt. Remove the belt and replace with a new belt.
You can remove your 1993 Mitsubishi alternator belt by loosening the tensioner pulley. Slide the tensioner pulley to the right. The alternator belt will become loose and can be removed. Reverse the process to put the new alternator belt on.
when do you change cam belt and when do you change timing change
See instruction on http://www.mgfcar.de/alternator/belt_tension_MGF.htm
The alternator should be on the front of the motor with a belt on the pulley and wires connected to the back of it that can be removed.
To change the alternator belt on a Mazda 323, first remove the right hand air shield under the can. Then locate the pulley tensioner of the AC and loosen the bolts on the pulley. Finally, remove the alternator pivot bolt under the alternator to remove the old alternator belt and replace with a new one.
the alternator belt is the one all the way in the back. You have to loosen the power steering pump, A/C idler pulley, and then loosen the alternator.
What belt? Drive belt is easy, just loose the 3 bolts on the alternator, pry the alternator forward, put the new belt on, pry the alternator back, and tighten the bolts. Power steering belt is much more difficult.
To change the alternator on a 1987 to 1990 Chevy Celebrity V6: First disconnect the ground cable from the battery. Use a 3/8" breaker bar or ratchet in the square on the end of the belt tensioner to release the tension and take the serpentine belt off of the alternator drive pulley. There should be a routing chart on the belt guard between the water pump and the power steering pump. Remove the three bolts that attach the alternator to the mounting bracket. Pull the alternator up and disconnect the plug and use a wrench to disconnect the battery wire. Reverse the process to install the new alternator.