Alternators
Serpentine Belts
Pontiac Bonneville
Ford Falcon

How do you change the alternator belt on a 1993 Pontiac Bonneville?

131415

Top Answer
User Avatar
Wiki User
2006-01-12 03:55:09
2006-01-12 03:55:09

Use a wrench to loosen the tensioner which keeps tension on the belt. Once this is loose, pull the belt off of the tensioner. It will then come loose from the remaining pulleys (A/C compressor, water pump, etc.). A diagram should be located on top of the radiator showing the path of the belt to help you know how to install the new one.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

diagram for serpentine belt on 1996 Pontiac Bonneville se

User Avatar

what tools do i need to remove the wheel cylinder on a 1993 pontiac bonneville

User Avatar

http://www.modifiedlife.com/1993-pontiac-bonneville-car-stereo-wiring-schematic/

User Avatar

The pcv valne is located is located right near the alternator in the 1993 Bonneville.

User Avatar

on the bottom side of the engine.

User Avatar

How to override the security system

User Avatar

There could be several reasons why a 1993 Pontiac Bonneville keeps dying. A couple of reasons could be a dirty air control valve or bad spark plugs.

User Avatar

www.autozone.com is a wealth of information with pictures, too.Click on the left side where it says Repair Info. Select 1993, Then Pontiac, Then Bonneville, then water pump. It helped us.

User Avatar

E.g.r. location on 1993 BonnevilleThe e.g.r.valve is on drivers side of engine,top....Bolts to intake

User Avatar

170 horsepower with 225 foot pounds of torque

User Avatar

it is located behind the battery on the pass side fender. i belive its held in by 2 bolts. and 1 harness to unclip.

User Avatar

i the fuel pump is in the fuel tank, you have to drop the tank to get to it.

User Avatar

the owners manual states that replacement of the fuel filter is not required.

User Avatar

On the passenger side of the car behind the glove box. Get to from the inside.

User Avatar

I have a 1996 Bonneville and it has a Phillips head screw on each side of the armrest. If yours is like that then you should be able to just unscrew them and pop it out.

User Avatar

My 1994 done this I ended up replaceing the cam senor on it

User Avatar

The 1993 Pontiac Bonneville takes 18 to 24 gallons of gas depending on the engine model that you purchased. This car got about 23 miles per gallon on average.

User Avatar

Look here: http://autorepair.about.com/library/firing_orders/bl-fo-8193.htm

User Avatar

No try the starter relays first you will find them in the front driver side

User Avatar

The speed sensor may be built into the hub bearing. In that case the whole hub bearing needs to be replaced.

User Avatar

Chevrolet Camaro and Pontiac Firebird from the years 1993 - 1995.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.