You need a 3 inch C clamp,Allen wrench set,floor jack and some patience.For the brake pads on the front,Jack up the Blazer under the A frame on the side you are working on.Remove the tire.Use the Allen wrench to remove the claiper.The old pads will come off easy,note which pads goes where.Use the C Clamp to compress the Brake piston back into the caliper.Then place the new pads on and fit the caliper back onto the rotor.Insert the Allen head bolts and tighten.Put the tire back on and drop the jack.You're done.
NO NO, JUST STOP! IF YOU HAVE TO POST A QUESTION LIKE THAT HERE, JUST STOP! THE LAST THING WE NEED IS A TRUCK ON THE ROAD THAT SOME TARD TRIED TO FIX WHEN HE DIDN'T KNOW WHAT THE HELL HE WAS DOING........
it is a 1995 Chevy blazer and it will not go into park. have to use the emergency brake when stopped, and neutral to start it
Check the fuse, check the bulbs and check the brake light switch, it should be one of those.
Where is the idle speed motor located at on a 1995 chevy blazer?
how to change the fan belt on a 1995 Chevy blazer vortec motor?
where is the fuel shut off swith on a 1995 Chevy s -10 blazer at
The 1995 Blazer was rated at 5000lbs towing capacity.
Original manufacturer's tire size for a 1995 Chevy Blazer are P205/75R15 97S.
No it will not work, Is it not the same.
NO, It is all different. Won't work.
change out your wheel cylinders..
where can i buy a transmission dip stick for a 1995 chevy blazer
No it will not SORRY.
There are several, which one are you looking for?
The stock gear ratio for a 1995 Chevy Blazer is 3.73. This provides a good balance of fuel economy and power to the rear wheels.
They are lined up like this on my 1995 Chevy blazer 4.3 L, V6 1,6,5,4,3,2
You will need to remove the tire and wheel from your 1995 Chevy Cheyenne. Remove the brake assembly. Tap on the rotor with a hammer or mallet. The brake rotor will slide off. Reverse the process to install the new brake rotor.
How many qt dose it take to change transmission fluid in 1995 blazer 4.3
probably no because Chevy changed the type of fuel injection and it probably operates at a different pressure.