To change the head lamps, you will need to remove the headlight assembly. Each assembly is held in place by two plastic retainer clips. I've added a link to a picture of them to the right. After you remove those clips, the headlight assembly can be removed so that you can access the bulbs. Once you have access to the bulbs, simply disconnect the wiring harness, and rotate the bulb counter-clockwise to release it from the assembly. Installation of the new bulb is the removal procedure is reverse order. Take care to make sure that everything is lined up properly when reinstalling everything. A couple common mistakes are; not getting all three tabs of the bulb into the assembly, and not placing the assembly back into the groove properly. If you notice that your beam pattern has changed, be sure to check these 2 things. See the Related Link "Picture of retainer clips" to the right for a picture of the clips.
how do i change a heater core on a 2000 Chevy impalla
to change 2000 Chevy cavalier a/c evaporatorto fix it
Remove the light assy and turn the bulbs counterclockwise.
How do you change a tire on a 2000 chevy suburban
How to replace passenger side head light bulbs in a 2000 Honda Accord?
A 2000 Chevy S10 does not have a timing belt.
Bottom of the motor, passenger side.
it is under passenger side wheel fender
can you tell me why my 1999-2000 Chevy trailblazer light is on
Change the oil and the oil filter, than disconnect the negative side of the battery for 10 seconds than reconnect.
Not positive about the 2000, but in my 1999 they had to take off the front passenger tire to change the battery.
how to change front shocks in 01 Chevy s10