step 1 disconnect neg battery end. 8mm wrench will work perfect Step 2 jack and support pass side front so you are able to remove pass side front tire .remove tire,you should see a plastic shield with two Phillips screws (plastic) remove them step 3 remove serp belt, once belt is removed use an impact to remove crank bolt.once crank bolt is removed, you will need a balancer remover tool (can rent from parts house or buy) install crank puller and use impact on bolt end to pull crank pulley off p.s. use some wd40 to help things move better and take your time good luck
1998.5-2002 it is behind the starter2003 on up, it is on the side of the crank pulley.1998.5-2002 it is behind the starter2003 on up, it is on the side of the crank pulley.
How do you change a tag light on a 2002 impala
It is bolted to the block beside the crankshaft pulley,it reads the crank pulley.
It is bolted to the block beside the crankshaft pulley,it reads the crank pulley.
Remove serpentine belt. Remove damper pulley with puller. Remove oil seal.
Depends on year. 1989 to 1998.5 it is on the front above the crank pulley. 1998.5 to 2002 it is behind the starter. 2003-present it is below the crank pulley.
It is behind the crank shaft pulley in front of the motor!
No,it is right hand thread.
NO, IT'S JUST VERY TIGHT.
how do you align the crank pulley in reference to the cam pulley on a 2002 escort?
A 2002 Impala with the 3800 engine requires 4.5 quarts of oil (5w-30 is recommended).
How_do_you_change_the_fog_lamp_bulbs_on_2002_Chevy_Impala