forget about changing just the boot-its easier and faster to change the whole axle assembly and you dont need all of the special tools
no boot for 93 is 90-95 look on eBay orchrysler parts for 89 Of course it fits, without any restriction, all boots are the same from 1987 up to 1995, but Chrysler uses other part numbers!
in the boot
The 7th Annual Golden Boot Awards - 1989 TV was released on: USA: 5 August 1989 (Los Angeles, California)
Disconnect the car's battery cables, remove the spark plug cables and boot covers, and remove the old spark plugs. Next, put in the new spark plugs, attach the boot covers and cables and reconnect the battery cables.
What boot are you referring too?
You change the boot priority of a system by changing settings in its BIOS setup. The computer's first hard drive is usually the default first boot device.
You must remove the upper manifold to access the spark plugs. Each plug has an individual coil attached; you must remove the bolt holding the coil and boot in place.
In the boot, under the battery
You look at it and if it is cracked and leaking grease it has failed.
Disconnect the battery, remove the spark plug cables and boot, and remove the old spark plugs. Put in the new spark plugs, attach the cables and boots, and connect the battery.
its what tell the computer what to boot first, it can be anything choosen by the bios, if you go into the bios you can change the boot order.
you cannot just change the boot you will have to replace the whole axle