start by removing the clips that hold the grill cover on then remove the grill and depress the clip holding the marker light in then simply repolace the bulb.
AnswerOn top of the headlight, there 2 pins that are "L" shaped. Twist the pins forward and pull up and out of the housing.. This will allow the headlight to fall out. Then you will be able to pull the driving light housing forward away from the body and remove the light bulb from the backside.
AnswerYou do not have to remove the grille as the first person said.
AnswerThe easiest and correct way for the 2001 Chevy Suburban is: Open hood, twist the metal pins holding the headlight assembly inplace outward from the position they are currently in, pull up and then remove the pins, then simply pull out the headlight assembly (as an added bonus while this is out go ahead and clean it up, wipe it off etc..), once this is done, look behind the blinker light and there is a plastic tab, push this tab towards the outside and just simply pull the marker lamp and blinker lamp assembly out. Unplug the wires and simply change your bulbs.
Brake light on and why
The car actually measures the viscosity of the oil while you are driving and running the car when you change the oil the light will be reset.
check battery cables at battery may be lose.
change the bulb
A 2001 Intrepid does not have an oil change light.
Were and how do you change a brake light switch on a Daewoo Leganza 2001
The 2001 Chevrolet Suburban has 16 valves.
The 2001 Chevrolet Suburban has a V8 engine.
Located in fuel tank may have to remove to access
either u need to replace brakes or the light has a short in it
The 2001 Chevrolet Suburban is a gas-powered vehicle.
The 2001 Chevrolet Suburban has a 4-speed automatic.