The expansion valve is located under the hood, to the left of the Brake booster, mounted on the firewall. I have included a picture on my website under the Cooling folder. Please view my Bio for access to the site. I have highlited the valve in green
The expansion valve is located under the hood, to the left of the Brake booster, mounted on the firewall. I have included a picture on my website under the Cooling folder. Please view my Bio for access to the site. I have highlited the valve in green
were is crankshaft sensor located in 2001 Saturn l300
There is no expansion valve. The metering device is called a expansion valve should be located in the small line on the condenser it will be located near the line at the connection
how to use bcm to reset change oil light
You must remove the evaporator case from behind the glovebox and disassemble it. The expansion valve is mounted to the evaporator.
there should be a diagram on the back of the plastic panel you had to remove to look at the fuses.
they are located behind radiator and intake muffler. there are a couple of bolts and they come out in sets of 2
There is a video on U-Tube showing where the sensor is and how to change it. It is above the starter
To set the clock on a Saturn Vue, hold down the RCL button which should be located at the top right panel of the radio. Then you can press down either the right or left Seek buttons to change the time.
The instructions for this are located on the fuse compartment cover. The fuse compartment or housing is located under the hood next to the battery.
The expansion valve is located between the evaporator and the high and low pressure line connections. It is in the firewall behind the engine. Follow the hoses to the passenger compartment and they will terminate on the expansion valve.
Your owners manual should tell you where it is but most are located behind the glove box door.