While car is on the ground remove the center cap of the rim if any. Loosen the axle nut (probably a 30 or 32mm nut).
Remove: wheel, brake calipers and suspend it by string without stressing the brake hose, brake rotor (if possible)
Precisely mark position of strut to knuckle along with alignment washers then, loosen the two bolts.
Disconnect: outer tie rod from knucke, lower control arm from knuckle, cv axle from knuckle and cover with plastic bag securely, knuckle from strut.
Bring the new beaing and knuckle to a machine shop.
If the markings are correct, after re-installing the knuckle to the strut an alignmenmt will not be necessary.
PAY ATTENTION TO WHERE THE PARTS GO. DO NOT INTERCHANGE PARTS. MARK THEM, SKETCH THEM, TAKE BEFORE AND AFTER PICTURES, ANYTHING. Do not mix and match.
how do i change front wheel bearing of kia sorento 2003
How do you change a 1998 jimmy 4X4 front wheel bearing ?
To replace the front wheel bearing on a Ford Fiesta, you will need to remove the wheel. Then with a hammer you can pull the old bearing out.
Change wheel bearing on 2006 mercury mariner
how do you change wheel bearing on 98 mercury mountaineer
how do you change front wheel bearing for 420 rancher
how do I get to the front bearing on a geo 4 wheel drive
how do you change a 1998 Honda accord front wheel bearing
Remove the tire and wheel from your Chevy Lumina. Remove the end of the axle. Remove the wheel bearing nut. Remove the wheel bearing seal and the wheel bearing. Reverse the process to install the new front wheel bearing.
Front
to change a front wheel bearing remove macpherson strut and press out bearings with a press, replace with press.
No