The way me and my friend did this, was to drop the fuel tank, drain the fuel into something reuseable such as buckets of some sort, after you do that, there should be a metal ring on top of the tank, with some hoses and maybe a wire coming out of it. you need to spin that ring, either with a screwdriver or a specialty tool at a parts store, once you get that off, the fuel pump will come out, it will look like a little motor, disconnect it from the short hose, and while you are there, replace the hose, and im not sure, there might be a bolt or two holding the pump to the assembly, replace the pump, making sure all wires are reconnected, then installation is the reverse of removal, i recommend reinstalling the tank while its empty, and when you have it installed, then refill it.
Order some new ones or change the locks.
wher is the pcv located on a 1996 olds cutlass supreme 3.4 l engine
its computerized ma man.
It does not have a cabin filter.
where is the crank sensor located at on a 1996 cutlass ciera wit a 3.1 engine
The firing order for the 1996 Oldsmobile Cutlass Supreme SL is 1, 2, 3, 4, 5, 6. This is for the 3.1 Liter V6 engine.
16.5 gallons
how do i remove the front fender to 1996 Oldsmobile cutlas supreme.
The 1996 Oldsmobile Cutlass Supreme temperature sending unit can be found on the front of the engine. The temperature sending unit will be a few inches above the thermostat housing.
Blown fuse?
The 1996 Oldsmobile Cutlass Supreme OBD 2 port is under driver side dash above accelerator pedal
Check on the passenger side firewall may have to remove plastic cover