It requires a special puller and it is located on the front of the engine. It will require pulling the radiator and fan. You will need an air wrench to remove the bolt.
do the harmonic balancer have a seal for anti-freezer
It is located behind the crankshaft harmonic balancer pulley on the bottom front of the engine. The right lower splash shield and harmonic balancer pulley must be removed to replace it.
There is not much you can do with a bad balancer other than replace it with a new one.
take the serpentine belt off and then take the crank pulley off the balancer and then you will need a puller to get the balancer off the crank.
Take the serpentine belt off and then take the crankshaft pulley off and you will need a puller to get the balancer off the crank.
were is the oil filter located on a 1960 Chevrolet impala 6 cylinder engine located
Pull the balancer then the seal. NOT EASY
It is located in the transmission.
It is located in the transmission.
It's on the steering wheel, where the airbag is located. http://gtcarlot.com/data/Chevrolet/Impala/2005/11329687/Steering%20Wheel-49683885.html
The oil pressure sensor, on a 2008 Chevrolet Impala, is located on the front of the engine. The sensor will be just above the oil pan.
It is located in the gas tank.