I have a 2000 Ranger, and on mine the lens is made of plastic. To remove it, I squeeze the lens just enough so that the tabs will snap out.
To clean the inside headlight lens on a ford ranger just simply remove the cap and clean.
Remove the four screws,and pull the lens out. The back of the lens assembly has "twist out" bulb sockets. Pull the bulb straight out of the socket and replace with the same number bulb.
Drop the tailgate and look at the side of the lens for screws.
There's an 11MM nut that you would need to remove off of the backside of the lens. Once it is removed you should be able to take the parking light out of the Ford Ranger. An instructional video has also been included below that shows this process. Hope this helps, 1ATony
The lens is made of plastic. Just squeeze it and snap it out to access the bulb.
The lens is made of hard plastic. Just squueze it enough to pop it loose and remove it. Change the bulb and snap the lens back in place.
You have to cange the whole light.
= A lens cap is a cover to a lens on a camera or camcorder.=
remove the 2 screws at the top and pull the housing straigh out
You cover one lens of your binoculars to see by a different piont of view/prespective.
It protects your lens from dust and debris.