You will first need to take the bolts out of the fan shroud. And leave it set there.
Then raise truck and put it on jack stands. MAKE SURE ITS SAFE.
Now remove the 2 long bolts that holds mount to frame,1 on each side.
Then raise engine up above the frame mounts, Block engine up so it don't fall
on your arms are crush hands.
Now remove the 3 bolts that hold the mounts to the engine block. Replace the
mounts. then put back together. THERE YOU ARE.
2 motor mounts.
The four wheel drive S10 with the 4.3L engine motor mounts are very hard to do even on a lift. It's not a job I would attempt at home in the driveway. The two wheel drive S10, 4.3L is easier.
With great difficulty! Not a job that you should try in your driveway.
Yes it will fit.
you cant its impossible the body mounts and everything else is different between blazers and s10s
No you can not puth a 3.8 liter Pontiac engine into no s10 the motor mounts are way diffrent and the pontaic is a front wheel drive
With great difficulty, and if it is a 4X4 S10, with even more difficulty, especially if you are working on the ground with limited tools.
With great difficulty especially the 4+4 models.
YEah
The motor in a S10 Blazer can last for many years. It will really depend on how well the vehicle has been taken care of. With proper maintenance, the motor can last more than 200,000 miles.
not inless you convert the motor mounts and change the transmission but y would you want to use a ford motor they suck
The 4.3L engine holds 4.5 qts with filter change.