Dodge Intrepid
Ford Expedition XLT
Ford Ranger XLT

How do you change the oil pump on a 1996 Dodge Intrepid?

293031

Top Answer
User Avatar
Wiki User
2015-07-15 18:34:26
2015-07-15 18:34:26

I think the engine has to come out for that. Ger a manual on your car and read all about it.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

How do I change the oil pan gasket on a 1999 Dodge Intrepid with 3.5 engine, what is the proper torque for the bolts.

User Avatar

97 dodge intrepid, new fuel pump, won't start

User Avatar

its a in tank fuel filter replace the sock on the fuel pump

User Avatar

3.3L, it is external and driven by the serpentine belt. 3.5L it is internal and driven by the timing belt.

User Avatar

If the 1996 Dodge Intrepid will not start, there might be an issue with the battery or the starter. This could also be a problem with the solenoid or the fuel gauge or fuel pump. The problem and the fix will vary depending on whether the car is completely dead or is cranking when the ignition is turned.

User Avatar

The only fuel filter on a 2000 Dodge Intrepid is part of the pump module in the fuel tank.

User Avatar

Dodge does not use inertia/reset switches.

User Avatar

There is no fuel pump inertia switch on a 1999 Dodge Intrepid.

User Avatar

It doesn't have one. The fuel system is computer controlled with relays.

User Avatar

You have to take out the electric fans. then take off the belts and then you will have to pull the hurmonic balancer off take the timing cover off then take off the timing belt. the water pump is located in between the cams it is bolted on with 3 boltsand looks like a pully. this is for a 1996 dodge intrepid with the 3.5 v-6 you

User Avatar

Dodge does not use inertia/reset switches.

User Avatar

Autozone.com his a free online repair manual for the Dodge Intrepid and many other make and models. Also if your engine is a 3.5L V6 the water pump is driven by the timing belt, which would require you to set the engine at TDC and take the belt off.

User Avatar

It is located inside the of the fuel tank.

User Avatar

It is part of the pump module in the tank.

User Avatar

You could try searching for instructions on YouTube.

User Avatar

The fuel filter & fuel pump are connected as 1 piece, you have to lower your gas tank down & replace the filter & pump together.

User Avatar

the water pump is driven by the timing belt.

User Avatar

The leak detection pump switch on your Dodge Intrepid is located beneath the battery. If you can not locate this on your own, it may be best to have a licensed mechanic take a look at it.

User Avatar

Fuel pump is located in the gas tank.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.