0
Don't assume that low oil pressure is caused by a failed oil pump. It's usually worn bearings requiring a complete engine rebuild. It would be unfortunate to go to all of that trouble and find that it didn't really solve anything. Before you replace the oil pump, disassemble the old one and check for excessive wear on the gear surfaces.
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
What does the maintenance light mean on the 1992 Acura Vigor when it is red?
it is a reminder to change the oil.. goes red after 10000 Kms
Where is the oil sending unit on an Acura Vigor?
Its on the oil filter adapter housing and hard to get to.
What is the oil capacity of a 1993 Acura Vigor?
4.5 quarts if you are also replacing the oil filter.
Where is the oil pump on a 1994 Acura Legend?
In the oil pan
How do you change the oil pump in a Kia Sportage?
Oil pump change
I have and oil leak behind oil filter on a 92 Acura Vigor It's leaking from and cover plate that the oil filter in place by 3-10 mm bolts that holds it in place I can see the leak is it a gas ket?
Oil leak behind the oil filter it has 3-#10mm bolts that holds it in place Again it's a 92 acura vigor. I need to know is it a gasket or a O-ring? Also is there anything on the back side of this cover plate?
What kind of engine oil can you use in an Acura Vigor?
5W30 I believe is the recommended oil, check the factory service manual or the owners manual. Also under the hood will be a sticker with such info.
How Change oil pump on mercury mountaineer?
steps by steps how to change a oil pump
When do you change a transmission oil for Acura RSX and what mileage the first?
change trans oil at 15,000 interval
How do you change the oil pump in a S10 pickup 1991?
how do you change the oil pump on a 1991 s10 pickup
Where is the oil filter located on a 1992 Acura Vigor GS?
It is on the drivers side of the motor directly below the throttle body and air intake and is positioned behind the alternater.
Where is the 92 Acura oil pump?
your oil pump is located behind the lower timing cover. to replace you will have to drop oil pan pull crank gear off and then lower timing cover
