How do you change the power steering pump on a 2001 maxima?

Answer 1

* Disconnect the negative battery cable * Loosen the tensioner and remove the drivebelt * Using a large syringe or suction gun suck as much fluid out of the Power Steering fluid reservoir as possible.Place a drain pan under the car to catch any fluid that spills out when the hoses are disconnected * Loosen the right front wheel lug nuts,raise the front of the car and support it securely on jackstands then remove the wheel * Working under the car remove the pressure line to pump banjo bolt then detach the line from the pump.Remove and discard the copper sealing washers.They must be replaced when installing the pump.Wrap a plastic bag around the end of the hose to prevent fluid spillage * Loosen the clamp and disconnect the fluid return hose from the pump.Plug the hose * Detach the right tie-rod end from the steering knuckle arm and swing the tie-rod to the rear out of the way * Remove the pump mounting bolts then guide the pump out through the fendeerwell