drive front wheels onto ramps about150mm high to allow removal of radiator from below .remove fan cowling and hoses , fan to get room to work .undo nut on each side of radiator rubber mounting bolt.you can move the unit around enough to remove the side mount panels from the radiator and slide it out from under vehicle.
http://www.ebay.co.uk/itm/KIA-PREGIO-WORKSHOP-REPAIR-MANUAL-2004-/300919205330
the cylinder head has damaged the oil from the engine going to radiator
the correct torque for cylinder head bolt of kia pregio 2.7 diesel is 130-135ft-lbs.
If the non diesel fuel is drained out without getting to the engine there is a good chance there wil be no damage. For more information see the answer to the Related Question shown below.
how do you adjust the cluch on the kia pregio
J2 engines are as follows Inlet: 10 or 12 thou, Exhaust: 14 thou.
Hi, I have exactly the same problem. Did you ever find a solution ? Thanks Greg
The correct tire pressure of kia pregio is 50 psi.If the ambient temperature is higher,say going above 35deg,then keep it 45psi
Under the little front bonnet.
The cast of Annata di pregio - 1995 includes: Stefano Abbati Renato Carpentieri Patrizia Piccinini Hristo Shopov Elia Zaghelis
Ineed my code ratio for my kia pregio 3.0 2000
Could be many things.blue smoke whilst driving is usually worn piston rings.blue smoke only on take off valve stem seals.black smoke to much diesel fuel usually injectors or fuel pump.also if intake sucking oil up and pumping it straight out the back(unlikely)