Top Answer
User Avatar
Wiki User
Answered 2007-02-21 06:44:08

if studs are broke off take tire and brake drum off . take a heavy hammer hit broken stud drive it back toward backing plate. install new one push it in as far as you can. put drum on and the rim .as you tighten the lug nut the stud will snug up. snaps on

User Avatar

Your Answer

Still Have Questions?

Related Questions

How do you change a wheel stud on a 1995 1500?


How do you remove the cover to a 2001 Chevy Blazer Steering wheel column?

How to Remove the Steering wheel From a Chevy Blazer 2001

How do you change front wheel stud on Chevy 1992 s10 blazer?

The front wheel stud on a 1992 Chevy Blazer S10 can be changed by jacking the vehicle up, removing the wheel, and unbolting the caliper. The rotor assembly can then be removed, and the wheel stud pressed or hammered out of its seat.

How is the 2x2 Chevy Blazer?

2 wheel drive

1996 Chevy Blazer transfer case?

A 1996 Chevy Blazer Does have a transfer case IF it is equipped with 4 wheel drive

How do you change the tire studs on a 2001 Kia Sephia?

Trim the wheel behind the studs

What 4x4 rims are suitable for a Chevy Blazer?

There are many types of 4x4 rims that are suitable for a Chevy Blazer. The 4x4 rims that are suitable for a the vehicle known as a Chevy Blazer are the Capital Factory Wheel rims.

How do change the front tire wheel studs on a 1994 Seville?

How do you change front tire studs on a 1994 Seville sts

Is a 2004 Chevy blazer front wheel drive?

rear wheel drive or 4x4 capable

Help cannot unlock the sterring wheel car 1991 s10 blazer?

Cannot unlock steering wheel on 1991 S10 Chevy blazer.

Can you change a 1986 4x4 s10 Chevy blazer to a two wheel drive?

yes you can. just take off the front driveshaft from the transfercase. there you go, 2 wheel drive.

Is there two wheel abs or four wheel abs in a 95 Chevy blazer?

That would be 2 wheel ABS system.

How do you replace wheel studs on a 95 Chevy s-10?

I belive they are the knock out type take off wheel and drum heat studs on the back hit from front. to replace put new studs in and put back on tires.

How do you replace wheel studs on 93 Chevy s10 front?

To change the front wheel studs on a 1993 Chevy S10, you will need to remove the tire and brake caliper. If it is a floating rotor, you will need to remove the rotor. To install, you will need to use a special tool for removal. If the tool is not available, be prepared to use a large nut and washer for installation.

What is the wheel bolt pattern on a 1996 Chevy S10 Blazer?

5 on 4.75

Charcoal box on a 2001 Chevy Blazer?

Behind Driver Side Wheel

How many lugs on a Chevy 98 s10 blazer tire?

A 98 Blazer S10 has 5 lugs on each wheel.

What is the mpg on a 2001 Chevy blazer 4 wheel drive?

We get 21-23 mpg highway and 17- 18 mixed on our 2000 Chevy Blazer 4.3, 4X4.

How do you get the rotors off 1995 Chevy 3500?

Unbolt hub and press out wheel studs, clean hub face, replace rotor and press wheel studs back through, remount hub

1998 Chevy blazer front or all wheel drive?

It is rear wheel drive, until you shift it into 4 wheel drive.

How many lugs on97 Chevy suburban 2500?

It should have 8 studs per wheel.

What is the gas tank capacity for a 1999 Chevy Blazer?

I have an 1999 Chevrolet Blazer with 4 wheel drive, and it has about a 12-gallon tank.

Were can you find the flasher on a 1997 Chevy blazer 2 wheel drive?

It is behind the radio

Why could your 2002 Chevy blazer vibrate 65MPH or more?

Tire/wheel balance

What size is the front wheel bearing hub nut on a 2000 Chevy blazer?


Still have questions?