Want this question answered?
how hard is it to change a shifter bushings in a 1995 ford escort how do you change the sensors in the transmission
install transmission shifter assembly
The shifter cable connects the shifter to the transmission.
It depends on which seal you are talking about, mainshaft or shifter.
Manual transmission is a stick shift. You have to manually change the gears using the shifter and the clutch.
This should be really simple, if you've already removed all of the bolts which hold the shifter in including the one behind the shifter hole in the trans, the shifter should slide right down into the transmission (provided the transmission was in neutral when you pulled the shifter)
either the shifter cable needs adjusted or the transmission has gone out.
Remove the shifter cable and switch from the drivers side of the transmission and the seal will be driven over the small shaft and into the transmission case. The shaft is the one that the shifter cable hooked to.
Gear shifter or manual transmission.
1999-2000 models are different from the 2001-2005 models, in that they have separate chambers for the transmission fluid and the shifter. If you only intend to change the transmission fluid, you need 2 quarts. If you would also like to change the shifter turrent fluid, you will need to purchase an extra bottle, though you will only use a few ounces of it.
no
It sounds like the transmission shifter linkage is disconnected.