The starter is accessed from the bottom, use jack stands to get the car as high as possible and get under the car. there are two 13mm bolt holding the starter in place, one you can see, the other is around back, use a short 13mm with a 6" extension for the rear.
The signal wire is a 10mm nut, and 12V power is 13mm.
Vancouver's Best Mobile Mechanic
96 Saturn doesn't have a starter relay
A 93 Saturn does not have a stater relay.
how to replace a starter on a 1992 Saturn 4 door car standard
chain97 Saturn sc2 has a timing chain,its a pain to change though because there is not much clearance....but it can be done!
1997 Saturn sc2 loction of transmission dipstick
No, there is no inertia switch on any Saturn.
i have a 1997 Saturn sc2 410xxx miles my friend is at 560xxx on his sl1 if you treat a Saturn well it will last a lifetime if you don't you will cry
It's inside the alternator.
no it will no
it under the car near the oil pan 2 bolts and it hard as all to get to the top one
Remove the positive cable from your 1998 Saturn battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
The stock tires are usually 35 psi
see link below
Below the water pump on the front left side of the car.
need to change more often
The same way you do with any other car.
is if the bumper or the bumper skin (cover) the bumper will fit the skin wont due to slightly different shaped headlights BUT its just a tiny bit of cutting to get it to work
You need a scanner. Go to autozone/advanced auto and you can borrow a scanner from them.
1.9L Dual overhead cam 16 valve 125 hp
how to use bcm to reset change oil light
Back of the motor, next to the oil filter...
Rotate the drivebelt tensioner to release the tension on the belt and remove.