0
In the trunk near the quarter panels there are three screws lined up vertically. Unscrew the top one. Once you've done that pull the light casing out. Then behind each light housings there are tabs lights 2 and 4 you push a tab in and twist according to where the arrows direct. Light 1 (under and to the left of light 2 or right whichever side of lights you're working on) and light 2 look like little white tabs simply twist (counter clockwise) you will hear a click then pull the light out. To reassemble follow directions in reverse.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you change a tail light on a 1988 Chevy Celebrity?
To change a tail light on a 1988 Celebrity: Open the trunk. Look on the back of the side light you want to change. There will be several 10 mm nuts. Remove the nut in the center of the tail light lens. It is usually silver. The lens will then pull out a bit, then there is a tab into the backup light, pull the lens out of that. You can then remove the light socket and replace the bulb.
How do you change the rear light on a 1988 Chevy Celebrity?
In the trunk near the quarter panel there are several nuts that hold the rear header on. In the center is the nut that holds the tail light assembly on, it is in the middle of the tail light assembly. Take the nut off, then pull outward on the tail light until the stud comes out of the header, then pull out to the side to release a tab from the backup light fixture. Then take off the appropriate fixture and change the bulb.
How do you change the rear brake lights on a 1988 Chevrolet Celebrity?
To change the tail light bulb on a 1986 to 1989 Chevy Celebrity coupe or sedan: 1. In the trunk by the appropriate quarter panel there are three nuts, the middle nut holds the outer end of the tail light fixture in place. Remove that nut, it should align with the middle of the tail light fixture. 2. Pull back on the tail light fixture until the stud comes out of the body. Then pull slightly outward on the tail light fixture to pull a tab out of the backup light fixture. 3. Locate the appropriate socket for the bulb you are going to replace and remove the socket from the tail light fixture. Put in the new bulb and reverse the instructions to put the tail light fixture back in place.
How do you get at the tail lights on a '89 Celebrity?
To change the tail light bulbs in a 1989 Celebrity sedan: 1. Inside the trunk near the quarter panel are 3 nuts. Remove the middle nut, it should be in the center of the tail light fixture. 2. Pull back on the tail light fixture so the stud clears the body. 3. Pull outward on the tail light fixture to clear a tab out of the backup light assembly. 4. Twist the appropriate socket counter clockwise to remove the socket from the tail light assembly. 5. Change the bulb and put the socket back in the tail light fixture. Reverse the removal process to reinstall the tail light fixture onto the car.
How do you remove tail light lens cover to change bulb on 1986 Chevy Celebrity euro sport?
In order to change a bulb in the tail light of a Chevy Celebrity you must remove the tail light assembly from the car. To remove the tail light assembly" 1. In the trunk next to the quarter panel there are nuts that hold the rear header on, the center nut holds the tail light assembly on. It will be in the center of the tail light assembly near the outer edge. Take the nut off and pull the tail light assembly out until the stud clears the body. 2. Pull the tail light assembly to the side to disengage the tabs from the backup light panel. 3. Twist the appropriate socket to remove it from the tail light assembly, then unplug the lamp and replace it. Reverse the steps to reinstall the tail light assembly.
How do you remove the tail light lens from a 1989 Chevy Celebrity?
The tail light lens on a 1989 Chevy Celebrity is part of the tail light fixture and cannot be conveniently removed. If you want to change a light bulb you have to remove the tail light fixture from the car. To remove the tail light fixture: 1. In the trunk next to the quarter panel are three nuts, remove the center nut. It should be in the center of the tail light fixture. 2. Pull the tail light fixture so that the stud comes out of the body, then pull outward to pull the tab out of the backup light fixture. 3. You can now take the appropriate socket out and replace the bulb. Reverse the steps to replace the light fixture.
How do you change a tail light on a 2006 sequoia?
how to change tail light bulb on Toyota sequoia
How do you change tail light in Toyota sequoia?
How do you change the tail light on a 2001 toyota sequoia
How do you change the tail lights in a 1988 Chevy 1500?
Open the tail gate and look at were the straps that hold the tail gate are at on the sides of the bed. Now look at the 2 Phillips screws and remove them then the light will come out.
Do you have a picture of the tail light bulb removal for a 1987 Chevy Celebrity?
I don't have a picture or know where one is but I will try to explain the process to replace a tail light bulb in a 1987 Chevy Celebrity: 1. In the trunk near the quarter panel are 3 nuts. Remove the center nut, it will line up with the center of the tail light fixture. 2. Pull the tail light fixture out until the stud clears the body, then pull outward on the tail light fixture to free it from the back up light fixture. 3. The plastic bulb holders twist into place, twist back to remove them. You can then change the light bulb in the appropriate bulb holder. To install reverse the process.
How do you get to the rear tail light to change it on a 94' crown Victoria?
on the tail light problem - unbolt the tail light from inside th truck -the hold tail light assemble will come out - it is recommended to change all the blubs your all ready there
Where is a the relay for the tail lights on a Chevy Celebrity?
There is no relay for the tail lights on a Chevy Celebrity.
