There's a little panel you can pop out of the plastic inside wall of the trunk. If you can't reach the light you need from that opening, you'll have to pull the lining back (see all the little plastic fasteners? They look like a circle within a circle - push down on the inner circle with something, for example, a pen, and the outer circle should pop up, allowing you to remove the fastener). Remove the fasteners, then pull the liner back so you can reach whatever light you need to replace. It's hard, but the fasteners go back in easily enough (just pull the peg through, then reinsert it but don't push it all the way in - then put the whole assembly into its proper hole and push the peg down until it clicks).
on the tail light problem - unbolt the tail light from inside th truck -the hold tail light assemble will come out - it is recommended to change all the blubs your all ready there
how do you change tail light cover on a 1994 ford ranger
Look for the same answer. where is the location of an 92 - 94 acura vigor flasher?
I have the same problem, I don't know what to do.
take it to your mechanic so he can run a diagnostic.
"Where is cooling fan relay on 94 acura legend?"
Open the trunk, pull back the carpet material and there will be big black knobs, unscrew them (should be three each tail light) and the light will pull out and turn the plug on the back and pull out the bulbs.
no
To check a engine light you need some kind of scan tool and it will show you what kind of code or codes is set for the engine light to go off.
I was informed by carl a tech at honaccurate, a reputable shop in boulder,CO that 94 acura integra does not have an EGR valve.
The ac relay on the 94 Acura is located under the hood. It is in the relay box mounted near the battery.
Yes, but you'll need to change the headlights to 1998-2001 models.