Remove the water supply line to the thermostat housing. Remove
the thermostat housing retaining bolts. Lift the old thermostat out
and replace it with the new thermostat.
how do you change the thermostat on a 1998 lincoln continental?
How do I change my thermostat in my 1998 ml 320
Thermostat is in the housing under the left coil in the housing connected to the radiator hose. Takes about 30 minutes, if that long, to change.
Remove the water supply hose from the thermostat housing. Remove the thermostat housing retaining bolts. The thermostat will lift out. Reverse the process to install the new thermostat.
Drain the water from the cooling system. Remove the water supply line to the thermostat. Remove the thermostat housing bolts. Remove the thermostat. Reverse the process to install the new thermostat.
top front of engine follow the top radiator hose to where it goes to engine it will be a rounded top housing the hose clamps directly to it take off housing thermostat inside
show diagram show diagram
You need to follow the bottom hose to were it meets engine. It is located there.
location of thermostat in 1998 Lincoln continental
follow the bottom right hand pipe to underneath the engine remove pipe and then remove thermostat housing and replace thermostat the same way as it comes out.
Ideally, a thermostat should be changed before it fails or begins to fail. Personally I would change it every five or six years or so, with normal driving.
The thermostat in a 1998 Hyundai Accent is located on the engine block. The thermostat can be found by following the upper radiator hose to the thermostat housing.
Passport Designs ended in 1998.
you probably don't want to do it...you have to take off the front bumber just to get to it
The thermostat is located in the housing on the engine side of the upper radiator hose on a Honda Passport 3.2 engine. You will have to take the air filter tubing off to get to it.