Want this question answered?
There is no speedo cable on a Sunfire.
unfortunately you don't.you have to purchase a new cable as these have no adjuster
Generally, on ther throttle body. It is located 90 degrees from the accelerator cable.
what i did for a ground on my girlfriends 96 sunfire was in the trunk there are hooks that hold the cargo net and the carpet down. unscrew it and just place the ground cable in between the bolt and where it will be screwed into that works fine.
disconnect the negative battery cable for 10 mins this will reset computer it will do it for sure
Are you really asking about the speedometer, or are you asking about the cable? It's hard for me to believe that you don't know where your speedo is.
I'm not positive here, as I don't have my Haynes manual at hand, but I think the speedo is cable driven from the transmission.
Master reset for what? Be more specific. unhook the negative cable from the battery for 30 seconds
It could be that something in the pedal is bent/broken. More than likely the cable is binding. I'd replace the cable if nothing else is visibly causing the problem.
there is no cable, the ecm calculates the engines RPM and transmitts it to the microprocessor in the gauge cluster, via a serial data line.
There are several reasons why the ABS light could be staying on in your 1995 Pontiac Sunfire. One reason is that the cable could have come loose. Another is that the fuse could be bad. To be on the safe side, you should have the car checked by your mechanic to see if there are any serious problems with the brakes themselves.
You don't. You replace the worn out rear break shoes. If that doesn't do it you need to replace the stretched E brake cable.