you have to drilll out the rivets there should be 3 of them then pull the old motor and regulator out replace it and use either self tapping screws or new rivets to secure it
It is built into the alternator.
It is a picture showing a complete assembly of the regulator. Its main purpose is to control movements of the window.
A 1996 camaro has the same DISK brakes as a 2001. It does not have drum brakes.
If it is electric windows it is the motor which needs replacing or it could be the regulator
Its should be same thing
TAKE OFF THE DOOR PANEL BY REMOVE ONE SCREW AT THE DOOR HANDLE, 2 IN THE HANDLE YOU USE TO CLOSE THE DOOR THEN 4 AT THE BOTTOM OF THE DOOR. THIS WILL EXPOSE THE INSIDE OF THE DOOR. NOW YOU CAN CHANGE THE REGULATOR.
replace window regulator and/or motor
You should by a new window regulator , not the motor. take your old motor off the old regulator and replace the old regulator, its off track for a reason, ....Its worn and damaged.AnswerYou should by a new window regulator , not the motor. take your old motor off the old regulator and replace the old regulator, its off track for a reason, ....Its worn and damaged. Kongkit Raggan-Supatanampon
The upper intake manifold must be removed to gain access to the fuel pressure regulator.
they are the exact same
no they will not
How do I install rear coil springs on a 1996 Camaro?