Best Answer

See Related Links Below For Wiper Blade Installation Videos

Removing wipers on most vehicles will be one of these procedures: If your wiper arm has a pin end: insert a flat blade screwdriver between the arm and the wiper blade and twist the screwdriver; the blade will pop off. Simply push the new blade on until it clicks. If your wiper arm has a hook end: Lift the arm/blade off the windshield, tip the top edge of the blade up toward you, and pull back on the blade until it releases. Some of these hook type can be stubborn so you might need to use some moderate force to remove them. Install the new blade by pushing it up into the hook until it clicks. I have personally installed THOUSANDS of pairs of wiper blades and still get frustrated when I do some of them, so Don't think you are doing it wrong ;some just get stuck on!


1. Buy the correct-fit replacements. Correct replacement windshield wiper blades are not only correct length, but also correct attachment. Never just buy by length only. Always lookup your vehicle in an application guide at the store or now-a-days you can 'lookup wiper size' online. The key to an easy install is correct size/correct part numbers.

2. The new replacement wipers will have step-by-step, illustrated instructions. Take your new wiper blades and instructions out to your vehicle and physically get the old and new wipers in your hands and take a look. The instructions will make 100% sense once you're looking and touching them.

3. Most wiper replacements do not require tools and take approximately 2-15 minutes.

User Avatar

Wiki User

โˆ™ 2010-11-07 00:12:34
This answer is:
User Avatar
Study guides

Add your answer:

Earn +20 pts
Q: How do you change the wiper blades?
Write your answer...
Still have questions?
magnify glass
Related questions

How do you Change Windshield Wiper Blades on a 2004 Chevrolet Trail Blazer?

How do you Change Windshield Wiper Blades on a 2004 Chevrolet Trail Blazer?

How do you change wiper blades on a Peugeot 307?

To change the wiper blades on a Peugeot 307 you need to pop open the bonnet and put it on the strut. This exposes the blades and makes it easier to remove.

How do you change the front wiper blades on a Y reg Peugeot 306 Diesel meridian?

You can change the wiper blades by removing the retaining clip to the wiper blade arm. The wiper blade will come off and can be replaced.

Why do the windshield wipers make noise?

Change the wiper blades.

How do I change the wiper blades on my 2005 Pontiac?

The wiper blades are very easy to change oo a 2005 Pontiac,,its a simple snap in installation. If you need it there is a video of the process at

Can you change position of wiper blades on Jeep Wrangler?

this is only for the person

How do you change the wiper blades on a 2000 Pontiac Bonneville?

The 2000 Pontiac Bonneville takes a 22" wiper blades on both sides front. However, when buying windshield wiper blades be sure to always use the application guide book at the store. The replacement wiper blades will come with step-by-step, illustrated instructions.

How do you Change the wiper blades on a 1992 Buick Century?

Blades are pressed onto posts on the end of the wiper arms. Just pull and wiggle and they'll come off.

How do change windshield wiper in 2001 Toyota corolla?

Avalon windshield wiper blades?

Yes, the Avalons were manufactured with wiper blades, what about them?

How do you change out the wiper blades on a 2004 Tacoma?

Most auto parts stores will change them for you if you buy them there.

How do you change wiper blades 2004 Grand Am?

The 2004 Pontiac Grand Am has hook-end wiper arms and are easy to change. See the Sources and Related Links section below for videos on how to change wiper blades as well as what size wiper blades are on the vehicle (correct attachment and lengths). Tip: if you purchase the replacement blades first, there will also be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.

People also asked