On the right of your handle bar should be the standard kill switch and light switch, under there should be 2 or one screw(s), You ana loosen or undo them allowing u to b able to pull your throttle off or what ever you plan to do with it.
One can buy some cheap but quality scooter handlebar grips from Skate Hut, Razorama, Skates, eBay and Amazon online stores. Having a quality scooter handlebar grips is very important, as it allows one to have a proper grip when one goes on a jump with the scooter.
You have to remove the endcaps from the handlebar, this is done by loosening the screw on the end of the endcap. The grips will not come off easily, you must pull hard on them in most cases.
The throttle is on the right handlebar grip. Your brakes are the levers on each handlebar, the front brake is on the right and the rear brake is on the left.
Animal Edwins, get them off dans comp for around $11
The same as a street bike. On the right handlebar.
This Harley-Davidson came with standard handlebars with rubber grips. They could be upgraded to chrome or rubber grips, and you could change the handlebar type to your preference when ordering. Harley-Davidson will generally build the bike the way you want it.
cut off the old grips with a box cutter knife. when you put on the new ones make sure the grips are on the right side. the throttle one is bigger cause of the throttle. then before putting them on spray the inside of the grip with hair spray or a grip glue from a dealership. they work the same but what they do is lube the handlebars to slip in then when they dry they turn sticky so the grip wont move
Typically ATV grips are the same size on both left and right sides, whereas motocross grips have a larger core on the one side to accomodate a twist throttle.
It works like a screw. There is a pin on the inside of the throttle tube that, when the throttle is twisted, moves the throttle bar toward the outside end of the handlebar. The throttle bar has the throttle cable mounted into the end of it, so when it moves, the cable is pulled and the engine revs.
Yes they do. I put bike grips on my razor scooter and they fit on ok but they are a bit long.
This is called handlebar grips and the function is to provide material that is easy to hold in your hand and that partly absorbs vibration. It would not be comfortable to hold the bare metal of a handlebar in one's hand. A motorcycle driver needs a grip made of material that increases driving safety, improves the handling of the bike and prevents his hands from gliding too easily off the handlebar as he steers the bike. So the function of the grips is borh to increase safety and the comfort of the driver.
This is called handlebar grips and the function is to provide material that is easy to hold in your hand and that partly absorbs vibration. It would not be comfortable to hold the bare metal of a handlebar in one's hand. A motorcycle driver needs a grip made of material that increases driving safety, improves the handling of the bike and prevents his hands from gliding too easily off the handlebar as he steers the bike. So the function of the grips is borh to increase safety and the comfort of the driver.