1. Unhook positive battery terminal.
2. Loosen 4 10 mm bolts to water pump pulley--DO NOT REMOVE BOLTS YET
3. Remove serpentine belt--inspect and replace if worn or cracked
4. Remove 4 pully bolts--Remove 5 water pump bolts. Remove old water pump.
Make sure you have a catch pan for antifreeze. You WILL spill some antifreeze.
5. Clean any gasket material off water pump face
6. Install new water pump and gasket
7. Replace pulley and install serpentine belt.
8. Reconnect battery terminal
Remember to check your antifreeze level prior to starting.
1 1/2 to 2 hour job for a novice.
please show me a diagram of a water pump on the engine of a Chevy venture 2003
yes
1 hr and 15 mins aporx
At least on a 2003 Venture, there is a door in the back of your glove box that opens where the air filter is at to change.
Yes
Consult your owners manual...
The 2003 Chevrolet Venture coolant capacity is four gallons. The coolant can be mixed 50 percent anti-freeze and 50 percent water.
The drain plug on the 2003 Chevy Venture is located on the bottom edge of the radiator. It is on the side facing the engine.
32 to 35 psi.
it cost 320.00 at the garage that's what i paid for it on my 2003
Yes, those GM 3400 motors are the same. The transmissions are different -- 4L60e versus a 4L65e
Check fueleconomy.gov. In my 2004 Venture we get 19 city 25 highway.