Want this question answered?
Just connect the battery to the motorcycle battery cables with jumper cables and then start it.
You connect the cables BEFORE you plug in or turn on the charger. Positive (red) to battery positive first, then negative (black) to battery ground. Then you turn on your charger and set the timer.
it will arch out and melt the knobs on your battery and your cables
Disconnect the cables at the 1997 Nissan battery. After following one cable to the other end, disconnect it then pull it out. Feed the new cable in the same way. Connect the non battery end. Do the same for the other cable then connect the cables to the battery.
Disconnect the cables at the 1998 4runner battery. Follow the cables to the other ends, paying attention to the path that they follow. One at a time disconnect the cable end, pull it out, then connect the non batter end. Connect the cables to the battery to finish the installation.
disconnect the 91 blazer cables at the battery. One at a time, disconnect the cable at the opposite end, then pull it out. Put the new cable in, routing it the same way, then connect the non battery end. do the same for the other cable, then connect the cables to the battery.
If you reverse the battery cables, yes the battery can possibly explode.
Disconnect the Regal battery cables. Find the battery clamp then remove it. Lift the battery out, then put the new one in. install the clamp, then connect the battery cables.
disconnect the battery cables. find the battery clamp and remove it. Lift the battery out, then set then new one in place. Install the clamp, then connect the battery cables.
Take the cables off of the battery. Remove the battery hold down clamp and lift the battery out. Set the new battery in, reinstall the holddown, then connect the cables back.
To jumpstart a car, firstly you need jumper cables. You will connect the jumper cables to the Volvos battery and connect the other end of the cables to another cars battery and give that car gas to help send a jolt to the Volvo.
Sounds like you are reversing the cables.