disconnect the 91 blazer cables at the battery. One at a time, disconnect the cable at the opposite end, then pull it out. Put the new cable in, routing it the same way, then connect the non battery end. do the same for the other cable, then connect the cables to the battery.
Remove the positive battery cable from your 1997 Chevy Blazer battery. Remove the cables from the front of your starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
Disconnect the negative battery cable from the battery.
how to replace a heater core in a 1997 Chevy blazer
Replacing a battery in a 2001 Chevrolet Tahoe is very easy to do. You will just need to take off the battery cables off the battery and put them to the side. Remove the old battery and replace with the new one. Put the cables back on the correct posts.
Clean the cables and bolts of all corrosion and tighten them so that the cables will not move. This will insure a good connection.jd
generally that you have an electrical issue, either your battery is dead or dying, or it could be your alternator also... make sure you have booster cables in your vehicle
Service brakes - replace Master cylinder Parking brake- either lubricate or replace cables ; I had a similar problem with my 1999 Chevy blazer, i ended up replacing the caliper and have had no problems since.
How do you replace fuel injectors on 2003 Chevy blazer?Read more: How_do_you_replace_fuel_injectors_on_2003_Chevy_blazer
how do you replace seatbelt retractor on a 2000 chevy blazer
You need to disconnect your battery cables. On the right side under your motor is your starter you will have a - and a + wire disconnect them then take off two bolts and your starter will come right off. Then assemble the way you took it off.
These are low voltage sensitive. .Replace your car battery.
where is the blower motor on a 2001 chevy blazer