pto switch energizes a vacuum solenoid which puts pressure on the pto belts
What is the replacement PTO clutch for a Cub Cadet 2140 Onan
It is at the front of the motor off the crankshaft!!
Your PTO is not releasing the clutch. Pull the PTO and thoroughly inspect it. It may be that the bearing is seized.
Model 190-450 with the 4" pto pulley. Model 190-451 with 6" pto pulley. You also will need the drop down brackets for mounting.
pto switch bad
Have the owner's manual handy. Take the single bolt out, and the clutch should come off fairly easily. Do not force it too much. The clutch and pulleys will come off in one piece.
If you mean the red dot below the digital hour meter, it's telling you that the charging system isn't throwing enough voltage to operate the electric PTO and charge the battery efficiently.
First, check the operatorpresenceswitch located under the seat. Check and see if the wire are broken or that the switch is working. If this switch is broken the circuit to the deck will be tripped once the pto is trying to be engaged. If that doesn't work, next check and see if you have a battery that is strong enough to keep the electromagnet working.
The manual pto is the switch used to engage the mower deck.
This is most likely a blade clutch problem. Many times they short and have to be replaced.
Useing hack and sawsals cut around your clutch. Then, use your sawsal cut the engine`s shaft. NEVER cut the shaft of an engine. This person must have wanted to sell an new tractor to you. I am working on getting one off myself. I will update when done.