Check the timing for the 90 Corsica. the most likely cause for the engine not starting is it has jumped time causing the engine to fire at the wrong time.
With an OBD II reader. Instructions come with the reader. Codes are standard.
The check engine light can be caused by many different things. Auto parts stores have a reader that can tell you exactly where the problem lies. Without that, it is difficult to determine the cause.
Use a code reader to find out why the check engine light is on.
Most auto parts stores have a check engine light reader that you can borrow for free to read the code and also to reset the check engine light. If they are not busy, they may even do it for you for free. Support your local parts store! Worst case: Take it to your dealer or buy a check engine light reader that can also reset it.
You need to rent / purchase an OBD II code reader to check & reset the check engine light.
Any OBD II code reader will do the trick.
The check engine light on a 94 Buick Olds Cutlass is read using an OBDII code reader. It is connected to the port under the dash which interfaced directly with the reader.
Perhaps disconnecting batt for 30 mins-but it will just come back on.
The check engine light is on because of an emission control problem. In order to shut it off you have to have it hooked up to an OBDII code reader. The code reader will give you a code as to why it is on and can shut it off for you.
The check engine light on a Mazda CX7 can be turned off by attaching an OBD II code reader. It can both read the engine codes and turn off the check engine light.
When the check engine light comes on it should post a code. Use a code reader to see what the code is and ask again.
The check engine light can come on for a variety of reasons. You will have to have the vehicle connected to a code reader to determine the specific reason for the light to be on.
check the soleinoid
Its The check engine light, unless you have a code reader its best to take it down to the deal and have them check it out for you.
In the computer. If check engine light is on you can get them by plugging a reader into port under dash,.
With an OBD2 code reader
A Check reader is used to scan and submit checks to be cashed in. For example, the Paypal app on iPhone allows you to take a photo of, or read, a check, and have it scanned in automatically without having to visit the bank.
Check the timing on the Corsica for jumped timing. Most likely the engine is firing at the wrong time causing it not to start.
The check engine light sets a code for diagnostics and you need a code reader. Most auto parts stores sell code readers and most will check the codes for free.
Check engine codes are generally read with an OBDII reader that connects to a data port under the dash. As far as I know, no cars allow you to check them by pressing buttons on the dash.
You need to take your truck into a repair shop so they can read the code on their reader. You do not want to drive your vehicle with the check engine light on without knowing what the problem is. The lights are on because there is a problem; they should go off once the problems are fixed.
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
advance auto or OB II code reader
can be done by code reader only