0
You can't really clean the EGR valve. If it's faulty, it simply needs to be replaced. -Jesse
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Show a picture of EGR valve on a Chrysler Cirrus?
see link for pic of a Chrysler egr valve.
Where is the egr valve on a 2000 Chrysler Cirrus 2.5 l?
Look below where the upper radiator hose hooks to the engine.
Where is the egr valve located on a 2000 Chrysler cirrus?
If your car has the 2.5L engine. The EGR valve is located directly under the coolant fill cap & pipe. The EGR has a long metal tube that goes from the EGR valve to the upper intake plenum.
Where is 00 Chrysler cirrus 2.4L EGR valve located?
Underneath the airbox in the engine compartment. Go to www.autozone.com and look up the EGR valve. They have pictures of it so you know what you are looking for. Hope this helps!
Chrlysler Cirrus 1995 hard to start after setting?
This is a major problem for most Cirrus models, and thousands of owners have complained. The best website to get info on this issue is http://repairpal.com/cars/chrysler/cirrus#recalls_section It is probably the EGR valve. The EGR valve contributes to hard or rough start, and will probably indicate the beginning of the stalling issues to come. You will find all the recalls on this website that helped me before I invested in a 1998 Cirrus.
Can you clean an egr valve on a chrysler 300 v8?
You could take it off and clean it with carburetor cleaner, but it probably will not help. It will need replaced.
Where can you find the EGR valve on a 1996 L4 2.4 Dodge Stratus?
The Haynes Automotive Repair Manual (for Chrysler Cirrus Dodge Stratus Plymouth Breeze)1995 - 2000 shows the EGR Valve on the BACK of the engine block (passenger side) with the Solenoid/Transducer mounted just above it. (Figure 6.1a - Page 6-13). Tubing runs from the Exhaust system to the EGR Valve and from the EGR Valve to the Solenoid/Transducer and from the Solenoid/Transducer to the Intake Manifold. Try following the tubing. ...
Need answer to cylinder head misfire in Chrysler cirrus 2000?
Could be bad plugs and plug wires,distributor cap and rotor,EGR valve,check PCM.Could be some type of sensor.
Can you eliminate the egr on a 1973 318 Chrysler motor?
can you eliminate the egr on a 1973 318 chrysler motor
Why would the EGR valve on 1996 Toyota tercel fail when brand new?
You more than likely have a clogged egr port. Remove the EGR valve and clean the ports going to the engine with carb cleaner.
Where is the egr valve on a 1996 Chrysler Intrepid?
Under hood, passenger side, rear engine area, mounted on upper rear of engine
How do you test the egr valve on a 1996 dodge ram 1500 rear drive?
A 1996 Ram does not have EGRA 1996 Ram does not have EGR
