Want this question answered?
no the egr valve has a big effect on the engine,it is controlled by the pcm.
how do you clean a egr valve on a vauxhall zafira 1.6
Remove the EGR valve from the Corsa. Wash the EGR valve with carburetor cleaner. Make sure that the valve is clean of gunk and let it dry. Reinstall the valve.
Where is the EGR valve located on a 2000 Ford Explorer
DID U Clear the code B 4 U rechecked ?? Did U clean Out the Passage ways where the EGR Valve goes .
does a Hyundai tiburon have a egr valve
Whenever it fails.
* Remove the air intake duct from the throttle body and air filter housing * Position the hoses and wiring harness aside to access the EGR valve * Disconnect the EGR pipe * Remove the EGR valve mounting fasteners * Remove the EGR valve and gasket from the manifold.Discard the gasket * Using a gasket scraper clean the EGR valve mounting surface
po405---egr flow sensor low input-- this basicly means that the egr or connections to it need attention. remove and clean egr to get carbon build up out of it. also make sure it is clean at motor side where it mounts to engine, if no carbon replace egr valve.
Remove the wiring harness from your 2000 Dodge Stratus EGR valve. Remove the EGR valve retaining screws. Reverse the process to install the new EGR valve.
disconnect the wire, unscrew two bolts then you have egr valve in your hand its that easy. ohhh if you are putting new egr valve it's worth putting new gasket.BUT I'll recommend not to buy new egr valve, just clean it.here is the link to egr pic and some reusing detail about egr valve http://www.icess.ucsb.edu/~greg/rodeo/egr.htm
There is no EGR valve on a 2000 Honda CR-V. The emission system used in these vehicles did not require an EGR.