Find the audio-out port on the back of your PC or side of your laptop (usually a green marker with a picture of headphones or sound waves), and plug in headphones or speakers. If you only have the white and red stereo cables, head over to a wal-mart and buy a "Y-Splitter" so that it will fit into the computer and plug your stereo cables into the splitter.
If your TV has RCA audio outputs, you can connect an amplifier to these outputs to plug in speakers. If it has a headphone jack, you can connect computer-type amplified speakers to this output.
Regular passive (non-amplified) speakers will need to be connected to a power amp (an old stereo receiver can do this). Connect the line out of the computer to the aux or tape in of the receiver, and then connect speaker cables from the receiver to each of the speakers.
It depends on the speakers. Bose computer speakers are not designed to connect directly to speaker inputs on your receiver, as they have their own amplifier. All Bose home stereo speakers can be connected.
If the TV has an audio output, connect this to a stereo amplifier, and then connect speakers to this. Modern TV's don't have amplifiers for external speakers.
In general, you cannot connect a pair of speakers to a computer, because the computer's sound board does not normally include a power amplifier fit to drive a speaker.It might be possible to drive very small speakers with a high impedance directly from a sound board's headphone output, though.Note that most "PC Speakers" can be directly connected to a computer's audio output because the speaker itself contains a power amplifier. Strictly speaking, such a speaker is a combination of a loudspeaker and an amplifier (sometimes also called an active speaker).
The TV will need to have AUDIO OUTPUT jacks to connect to the speakers or a amplifier to power the speakers and subwoofer.
You should be able to connect them to the headphone jack.
If your TV has RCA audio outputs, you can connect an amplifier to these outputs to plug in speakers. If it has a headphone jack, you can connect computer-type amplified speakers to this output.
A computer can only handle one set of speakers at a time.
Maybe you forgot to connect it to your computer/laptop.
You can connect external speakers on a computer on either the headphone socket or sound output sockets on the sound card. You just need the compatible connectors on the audio wires of the music system speakers to connect to these sockets. - Neeraj Sharma
Installing new speakers on a desktop computer is a very simple procedure. First, you must connect the speakers and the computer via usb cable that came with the computer. The best place to connect this perhaps is on the back of the computer. Then, plus in the 3.5 mm jack on the computer. Plug the power chord, turn the speakers on, and your all set!
Regular passive (non-amplified) speakers will need to be connected to a power amp (an old stereo receiver can do this). Connect the line out of the computer to the aux or tape in of the receiver, and then connect speaker cables from the receiver to each of the speakers.
You can't. The only way is to simply, just connect your iPod to your computer then sync your songs and play from itunes.
plug the speakers in and if necessary download a driver or if there are built in speakers go to sound settings --------------------- Connect a pair of speakers of headphones to the audio jack at the back (usually) of your computer. If there is no jack, you will need to install a 'sound card' available at most major computer retailers.
It depends on the speakers. Bose computer speakers are not designed to connect directly to speaker inputs on your receiver, as they have their own amplifier. All Bose home stereo speakers can be connected.
Computer speakers generally connect to the computer using a standard headphone jack, although there are newer versions that use the Usb port and even some new wireless versions available.