0
How do you connect the horn to the brake pedal so when the driver brakes the horn will sound?
Watster
IT WOULD BE SIMPLE TO COONNECT YOUR HORN TO THE STOP LIGHT CIRCUIT IF ARE PREPARED TO PAY FINES AND HAVE YOUR DECLARED UNROADWORTHY
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
What does a brake booster do?
a brake booster supplies power to the brake system. this takes the hard out of the brake pedal allowing brakes to work harder with less effort or pressure on pedal from the driver
When braking a vehicle equipped with anti lock brakes the driver needs to?
The driver would need to step on the brake pedal when braking a vehicle equipped with anti-lock brakes. FYI, the driver would also need to step on the brake pedal when braking a vehicle that is NOT equipped with anti-lock brakes. Hope this helps.
Can you connect the parking brake cable to the brake pedal on a 98 ford f150?
And why in the world would you want to do that, as the rear brakes which are operated by the parking brake are already activated by the brake pedal. Do not even think of doing this.
What brake pedal is the cause of air being in the brake system?
The brake pedal has nothing to do with it. If air is in the system then bleed the brakes.
What is the brake pedal reserve distance?
It is the distance between floorboard and pedal top, when the brake pedal is fully depressed (after applying brakes).
Is the emergency brake a hydraulic system that is automatically actuated when the driver depresses the brake pedal?
No, the regular brake system is a hydraulic system that is actuated when the driver depresses the brake pedal. The emergency brake is a direct mechanical system that is manually actuated when the driver pulls the hand lever or depresses the emergency brake pedal, which is separate from the brake pedal.
When braking a vehicle equipped with anti-lock brakes the driver needs to?
press down hard on the brake pedal, and continue to steer the vehicle.
Can a brake pedal malfunction make your brake lights not work?
Usually that would be caused by a faulty brake light switch connected TO the brake pedal. If the brakes work the pedal is probably ok.
What could cause the brakes and brake pedal to stick when brake pedal is pressed?
Check around brake pedal for something rubbing. If OK, I'd look into the master cylinder.
What will happen if you ride the brake pedal or do not release the parking brake on a forklift?
You will wear out the brakes prematurely and you may also overheat the brakes and experience brake fade (no or poor brakes).
If you experience brake failure with a vehicle that has antilock brakes what do you do to stop?
press down firmly on the brake pedal and keep holding down the brake pedal
When a driver depresses the brake pedal what air brake system is he using?
If the vehicle has brakes on the steer axle (which any truck from 1975 and newer will have), they're using both the primary and secondary system - primary for the drive axle and trailer brakes, secondary for the steer axle brakes, and often for any additional lift axle brakes, as well.
