Want this question answered?
The EGR valve on a 1979 F150 with a 302 is located in the center of the engine. It is close to the firewall.
A 2001 Ford F-150 could have a V6 or V8 engine A 2001 Ford Ranger XLT could have a 4 cylinder or the 3.0 or 4.0 liter V6 engine
no, the ranger is quite a bit narrower than an f150
The oil pressure switch is located by the oil filter on a 1979 Ford F-150. This will be by the lower drivers side of the engine.
The 400 in the 1979 F150 has a 2 barrel carburetor , so unless your willing to change the intake manifold to a 4 barrel manifold and get a 4 barrel carburetor , I would stick with original equipment
NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
No.
Bolt Patterns are different ; 1992 Ford Ranger = Bolt Pattern: 5-114 1996 F150 = Bolt Pattern: 5-139
It is attached to the end of the fuel rail. On 2001 f150 it is located at the back of the engine. Good luck getting at it.
what carbutor model engine fit in a 1994 ford f150 with a 5.8 lighting engine
( 6 degrees BTDC ) according to motorcraft.com , one of Fords websites , unless the engine compartment decal shows different
www.motorcraft.com shows the ignition timing for a 1979 F150 with the 460 cubic inch ( 7.5 liter ) V8 , automatic transmission , as 14 degrees BTDC