I have a 94 Altima. I pulled a small black box from under the dashboard, just above the accelerator. It has a mess of wires leading to it. Amongst the wires are two fuses. I pulled out one and the car wouldn't start. I put that back in. Pulled out the other and the car starts fine, but the keyless entry no longer works. I hate the noise and my neighbors would hate me. So off it goes, I'll use the darn key as long as I don't have to hear that alarm.
You can not disable the factory alarm. It is built in as part of the computers. If it is a aftermarket alarm you should be able to remove it and put the car back stock.
To disable the seat belt alarm on a Chevy Colorado, locate the alarm fuse. Pull out the fuse to disable the alarm.
Read the instructions that came with the aftermarket alarm and follow them.
the aftermarket alarm kit
that easy take out your alarm out your car i m sure your alarm will be disable
You should remove the factory car radio. It really is inexpensive. Just remove it, put an aftermarket alarm in, and an aftermarket deck. Any other attempts or circumvents usually cause problems. I have a 97 civic and that process is exactly what I did and it was the best decision I have ever made.
how do you disable rover 25 car alarm
How do you disable the alarm system on a 1998 yukok
You can disable the speed alarm by removing the speed alarm fuse. When the fuse is removed the alarm will not sound.
my alarm system keep disable my car how do I reset or disable this alarm system
When the LED light on an aftermarket alarm stays on, it means that the alarm is active. The light generally shows that the alarm status is "ready."
To disable the alarm on the Mitsubishi Montero sport without the alarm key you have to open the door. Otherwise it is not possible.