If the Avalanche is anything like a 2003 Chevy Silverado, you can program the door locks as follows: 1. With vehicle off, Pull back the High Beam headlight lever (High Beams are on) 2. Turn ignition key on and off twice (ON, OFF, ON, OFF) , then release the headlight lever. Your vehicle should respond my locking or unlocking the doors. 3. You can now PROGRAM your locks by pressing a three button code, using the unlock/lock buttons on your driver door. Your manual should have details of the buttons you should press. For example, Press Lock, Unlock, Unlock, - and your code will tell your when to unlock, or to unlock at all. Here are some of the possible Combinations (A and B) A - Do not Lock Doors Lock All doors When Vehicle Is Started Lock All doors When Vehicle is placed in DRIVE Lock All doors when Vehicle reaches speed of 5mph. + B Do not unlock doors Unlock Drivers side door only - when placed in park Unlock all doors - when placed in park Unlock Drivers side door only - when key is removed from ignition Unlock All doors- when key is removed from ignition. These are a few examples, that can be programmed by pressing the unlock/lock buttons (three times).. If you don't have your manual, then you can try random combinations. Once you enter your 3 button combination, the vehicle exits programming mode. You can now start the vehicle and test the locks. Or: Repeat the process.
How do you disable the automatic door locks toyota 4runner 2013, with keyless system.
Look on the inside of your drivers side door, there should be a latch which you can disable. Lis@
Remove the relay or fuse for the door locks.
Remove the relay or fuse for the door locks
To disable it or put it on again . Turn ignition key on and off 4 times
all you can do is pull out the fuse for the power locks and lock the doors yourself
Remove the power locks and windows fuse you will loose power for your windows also
Remove the fuse.
Remove the fuse or the relay.
Your owners manual should instruct you on how to do this.
Open the fuse box, find the right fuse and pull it out
the dealercan turn them off with a scan tool