Want this question answered?
Just take the wire that go to the seat and join them together. ( THIS IS A SAFETY FEATURE IF YOU BY PASS IT WHEN YOU GET OFF THE SEAT THE LAWNMOWER WILL STAY RUNNING!!!!!!!!!!!)
That depends in the model and what transaxle it had. Typically it will be by the shifter that you grab to put it into reverse.
The dealer can do this. they disabled mine on a 2003 lincoln ls.
There is a switch for the reverse sensing system located on the dash just to the right of the instrument panel dimmer control. When the ignition is on and the gear selector is in reverse, this switch can be used to disable or enable the RSS . If the system has been disabled the off indicator remains illuminated, so press the switch again when the ignition is on, and the gear selector is in reverse to return the system to the ON position.
requires disabling airbag removing steering wheel and turnsignal cam remove switch retaining lock then switch install is reverse consult manual to disable airbab as to avoid injury
To disable a kill switch the wiring would have to be modified to bypass the switch. This is not advisable as the switch is a safety feature.
Most cars have a switch to disable the cruise control. To permanently disable the cruise, remove the fuse for the circuit.
nissan micra 2006. how to change a reverse switch?
It is totally dependant on whether the onboard computer is programmed to be required to reboot? If so, most likely not by a layperson. If not, and you know how to reverse engineer the electrical, it may be possible to bypass the kill switch.
cut the 2 wires under the seat and twist them together and wrap some wire around the switch to hold it down.if its a ground kill system just unplug it under the seat try that first.
Where is the reverse light switch on a CiTREON C2
A kill switch is used to disable the motor of a jet-ski if the rider falls off.