Want this question answered?
how to disconnect the factory alarm system on a 96 ford explorer
green light whit key flashing and not star
trying to change steering column in 96 explorer and alarm went off how do i disconnect the alarm
Fix the problem with the air bag system and the alarm will reset itself.
Since this is not OEM equipment, the answer can vary based on which backup alarm was installed. If the connections at the backup alarm are a ring terminal held in place with a nut and lock washer, you simply disconnect the ground.
I have a 1992 ecoline E150 van andtrying too un hook the alarm
All you need is about 10 bucks, go to shhding .com
disconnect the cable from the speaker behind the in the rear piller cover
To disable the factory alarm system on a Ford Ranger, you would have to disconnect the remote entry module (REM). However, if you do that, the keyless remote and driver's door keypad will no longer work.
If it is a after-market alarm just look under the kick panel below the steering wheel. Disconnect the connectors to the alarm it should deactivate the alarm. The relay of the alarm should switch power to normal operation.
cut the black wire behind the radio cut the black wire behind the radio
first- disconnect the battery or you'll be sorry.ZAP! second- disconnect the wires from the starter third- unbolt two bolts and you are done. Tada!