How do you disconnect the battery on a 2001 Pontiac bonnevill?
will disconnection the battery do any harm the the computor
First Disconnect both battery cables, then you want to disconnect the positive lead running to the fuse box. then you have to remove the strut bar that is above the battery, and finally behind the battery there is a rubber clamp holding it in place losen the bolt and you got it. you may have to also losen the fuse box to get to the bolts in the back of the strut bar.
To remove the old battery 1. Disconnect the negative battery terminal. 2. Disconnect the positive battery terminal. 3. Remove the crossbar support over the battery. 4. Loosen the washer bottle fill tube and move aside. 5. Loosen the fuse block and move out of the way. 5. Turn the battery sideways and remove. To Install new battery 1 Reverse the procedures bove.
Your battery went out in your 2001 Pontiac grand are you replaced the battery and now your security light stays on your doors unlock by themselves and your trunk pops up on its own What is wrong?
To remove the battery on a 2001 Pontiac Grand am 1) move sure you use a memory saver device 2) disconnect the + and - cables on the battery and 3)right underneath the - cable is a screw you need to remove, it holds the battry in place. Do the reverse to install. If you don't save the memory from the BCM/PCM your car will do all kinds of weird stuff on its own. I…
Disconnect the negative battery terminal disconnect the main output lead, and the smaller connector from the alternator Remove the drive belt Remove the front alternator bracket bolt The engine needs to be rocked forward to gain clearance for removing the rear bolts. remove the rear bolts, and the alternator.
* Disconnect the negative battery cable * Remove the air intake duct and the air cleaner housing assembly from the engine compartment * Disconnect the battery cable and the solenoid terminal connection from the starter solenoid * Remove the starter motor mounting bolts and detach the starter from the engine
# Disconnect the negative battery cable # Remove the air intake duct and the air cleaner housing assembly from the engine compartment # Disconnect the battery cable and the solenoid terminal connection from the starter solenoid # Remove the starter motor mounting bolts and detach the starter from the engine