Just use a boxed in wrench of the correct size and disconnect it.
Disconnect the negative battery cable from the battery, remove the two bolts from the starter, drop the starter enough to disconnect the wires from it and remove the starter from the engine.
Either disconnect the negative battery cable, or pull the fuses located inside the fender near the battery.
Pull the seat off and disconnect the negative cable first.
Disconnect the negative terminal on the battery for 30 seconds. The PCM will reset.
Disconnect negative from battery remove four clips from ashtray disconnect lighters and bulb reverse procedure for install
The battery is located under the back seat. the back seat is removed by tuging firmly on the front side of the seat. the battery is side mounted so disconnect the negative battery terminal by unscrewing the bolt with an 8mm socket. other batterries may be an 9 or a 7mm.
If you want to clear the codes to shut off the check engine light you can disconnect the negative battery post for a minute, this will clear the memory but if you haven't fixed the reason the light came on in the first place it will only come back on again.
You should never have to replace the wiring harness, and if you do get a professional to do it. Now if you are talking about the wiring harness for a after market head unit, then you just buy an adapter. AND ALWAYS DISCONNECT THE NEGATIVE BATTERY CABLE WHEN MESSING WITH YOUR CARS ELECTRICAL SYSTEM.
* Disconnect the negative battery cable.If the vehicle is equipped with a delco loc 2 or theftlock audio system make sure to have the activation code before disconnecting the battery. * Remove the drivebelt * Label and detach the wires from the backside of the alternator * Remove the mounting bolts and separate the alternator from the engine
disconnect negative side first.... then disconnnect all connections to the pos cable labelling as you go... replace with new cable... reconnect to battery.
* Disconnect the negative battery cable.If the vehicle is equipped with a delco loc 2 or theftlock audio system make sure to have the activation code before disconnecting the battery. * Remove the drivebelt * Label and detach the wires from the backside of the alternator * Remove the mounting bolts and separate the alternator from the engine
Positive (Red) to positive post on battery. Negative (Black) to negative post on battery.