Remove your radiator cap and look for a drain valve at the bottom of the radiator. With cap removed, to provide air intake, with engine off and engine cool open drain valve and drain into a clean pan. While the above instructions are indeed accurate, please be aware that the small plastic drain valve on Chrysler radiators are prone to leak or break when they are used. For this reason, I refrain from draining at the valve and instead carefully remove the lower radiator hose at either the bottom of the water pump housing or at the lower radiator (whichever is easier to access). Be careful when doing this not to crack the tube on the radiator outlet since it is also plastic and not very sturdy! I generally insert a small flat blade screwdriver between the hose and tube to help break the seal after the hose clamp is removed.
It is on the bottom of the passenger side of the firewall.
The ad drain tube is on the lower portion of the firewall, passenger side.
Use only Mopar or Zerex G-05.Green
With out knowing what has been damaged, it could be $100 to $5000
The ac drain on a 2003 Chrysler Town and Country is on the lower passenger side of the firewall.
Up to 2000 uses green. 2000-2012 uses red. 2013 and up uses purple. Do not mix different types.
The radiator drain on a 2010 Chrysler Town and Country is on the bottom driver side.
A 2000 Chrysler Town and Country does not have a mass airflow sensor.
A part or gasket has failed.
The evaporator drain on a 2002Chrysler Chrysler Town and Country is a small pipe on the lower passenger side of the firewall.