If your router supports NTP-server configuration, the spesifics should be described in the manual. Often the manual can be found on the internet by searching for Manufacturer Model User Guide. Most routers have web-based configuration: You simply connect your PC to it and enter http://192.168.1.1 (or your routers IP-address*) in your browser, and you will get a login-page. Enter the admin user name and password** for your router. Now you are logged in as administrator of your router. Find the link for the time settings-page and see what is available there. Some routers like Apple AirPorts etc don't use web-interface. There you use the Airport Admin utility *What IP-number to use? Find the IP-number for the router your computer is connected to in it's internet settings. 198.162.1.1 and 10.0.0.1 are common. Try your computer's IP-number except with a 1 as last digit. **No password? Don't log in or reset anything if it is not your router! Try admin / admin or admin and empty password if you don't remember the password (or read the manual about first login. Or about factory reset to erase all settings including password.
NTP servers are designed to synchronize the clocks of computers over a network. An NTP server is great in resolving matters when a deadline is involved.
A network time protocol (NTP) server is important for synchronizing the clocks between different computer systems. Since latency varies among system, it is important for such a differences to be reconciled.
NTP (Network Time Protocol) is a network protocol used to synchronize computers with a time server. The time server's job is to provide the correct time based on an atomic clock. NTP is useful in desktop computers, important in file or web servers, and vital in certain scientific applications.
NTP is Network Time Protocol. NTP allows you to synchronize clocks between computers.
what is the speed of sound in ntp
NTP(Network Time Protocol)
Use the "date" command to view and/or change the date and time. An example would be, "date --set="10:00:00" Syntax is HOURS:MINUTES:SECONDS You can also set the complete date with "date MMDDhoursminutesYY" Using "date" command it's very clear that you are manually setting the time of your pi. If you want to use an ntp server (Network Time Protocol), use "ntpdate ntp.ubuntu.com or any other ntp server name.
NTP is an acronym for Network Time Protocol. NTP is a network protocol for clock synchronization. It was developed before 1985 and is one of the oldest network protocols still being used.
It's not. It's beneficial for making sure that file creation and modification times are correct, but it's not required. NTP is also beneficial if Kerberos authentication is used for the NFS server. Kerberos uses a time-stamped ticket system; each ticket is only good for a specified time period, typically five minutes. Therefore, all machines involved need to have their clocks set to be approximately the same. NTP is beneficial for this as well, but again, it is not required, and can be accomplished in many other ways.
ntp
Normal temperature and pressure
As of July 2014, the market cap for Nam Tai Property Inc. (NTP) is $325,510,964.65.