take your rocker cover off n behind you will see the valve fixed by 2 torx screwws, unplug the cable running into it first then take the valve out and vice-versa to get new one in.
How long does it take to fit a concentic valve in a vauxhall astra
I know on my DTI estate its either a 8 or 9 mil socket (Mines a 02 model) turn socket left (there is two bolts look like stars) disconnect black tube from old EGR gently pull old EGR out of its place. (Then do the whole process in reverse. ) I must stress in treating this EGR with care .(Make sure you replace the EGR in the same position of the old one.)
fits a opel astra en kadett 1.6i en 1.6 16v
The reverse of taking it off
Yes.
It should. Look at the EGR valve; it's on the drivers side of the head. If the EGR valve is the same, everything else should be easy to exchange.
you should see and find the switch just under your brake pedal. it is easy to remove and fit
Through the 90's, all SC2 engines were mostly interchangeable. There was a difference in the head, requiring the use of a different EGR valve. If the replacement engine does not use the same EGR valve, it is possible to create an adapter to use the older style EGR valve.
if the engine is an 8 valve it is behind the timing belt cover and if its 16 valve its on the front of the engine (os) in a housing with 3 bolts
how wud i fit a master cindiner to a 97 astra
The Geo Prism and Toyota Corolla were assembled in the same factory on the same assembly line using the same engines. The EGR valves should be virtually identical.
Yes!