there is no fixing the tensioner. It needs to be replaced. it is not difficult to do. use a belt tool to release the belt. Remember to have a drawing of the belt pattern before you remove it. in most cases it will not have to be removed unless you are replacing the belt as well. There sould be one bolt that holds it in place. loosen the bolt and remove. If you lhave a digital camera tthis is a good time to use it. pictures make it easy to put things back on. Most parts stores will either have the part or can get it for you. it is also possible to find them at salvage yards. hope it helps. duboff Actually you need a 14 mm wrench to remove the belt. The tensiner is held on with 2- 10mm bolts one at the top and one you need to access from the side Remove the drivers wheel and the engine shield to acces it Thye top one is much easier if you remove the engine mount and support the oil pan
It has a timing chain.
http://www.youtube.com/watch?v=BdhCzA0NcDQ richpin
yes
chain
Chain
134a.
I have a95 sl1 saturn with a bad ac compress that rattles and want torerout the serpentine belt off the compress. What is the typical cost and is it worth it?
show warning lights and what they mean on 97 Saturn
Saturns have optional 15" tires; so, as long as they are both the same diameter, yes.
Check your belt. That's most likely where its coming from
Chain
Get the codes using a scanner