on the end that attaches to the side of the back rest there is a zipper. open the zipper, then you can tighten the bolt that holds the arm rest in place. takes about
30 mins & your done. Make sure the arm rest is where you want it as you tighten the bolt.
no no
Easy, get rid of it
If you are getting a Lean code then it is probably being caused by the intake plennum gaskets. This is a common problem on the Windstar. The fix is relatively easy.
2001 ford winstar sport burning engine oil
did you try the fuse?
This is an easily replaced part - around $15 at most any parts store. With someone holding the gate up, remove the spring retainer clip from each end and remove arm. Reverse to install.
where is the #5 injector? how long does it take to fix
about $1100.00
Pull the fuse. In 1996 Windstar, it's fuse #33
Trouble code P0301 means: Cylinder 1 Misfire Detected
Unplug it now! Our 2002 Windstar LX almost burst into flames this morning because the malfunctioning Driver's seat drive motors shorted out! Take Windstar to Ford and have the undercarriage framework replaced before yours also overheats and starts a fire.
Need to know if it is the intake manifold or an exhaust manifold and what is wrong with it.